Specifically designed with finishes for the chemical industry
Description
Tank designed exclusively for the chemical industry for any stage of the product’s process.
Some chemical products require high-temperature heating (> 100°C). This involves the fabrication of a half-pipe coil around the tank or an internal coil within the tank body, through which the heating medium will circulate at predetermined working temperature and pressure.
Features
- Diameters can be custom-made to the client’s specifications, and depending on the required capacity, manufacturing will take place either in our workshop or at the client’s facilities.
- Pipe connections, manholes, valves, etc., are specific to the chemical industry, although the construction process is very similar to other sectors. The level of finish may vary.
- As an alternative to internal product mixing systems using side or vertical agitators, and oriented for tanks in the chemical, pharmaceutical, and cosmetic industries, an injector nozzle system (for air, gas, product, etc.) can be installed, capable of stirring the stored product without altering its composition or state.
- The number of injector nozzles will be determined by the tank volume, the injected air flow rate, and the nominal diameter of the nozzles.
- Some typical accessories are:
- Dryer for the animal feed industry.
- Internal coil for heating and maintaining product temperature.
- Tank with hinged half-lid and vertical agitator for product mixing.
- External half-pipe coil for product temperature control.
